Select Page

EMCA Heat Shrink Backshell

EMCA shrink boot adapter products are configured to accommodate Hellermann or Raychem heat-activated shrink boots.

The adaptors offer an excellent solution when the unshielded cables are terminated with heat shrink boots. The EMCA shrink boot adaptors have a groove to the rear where the heat shrink boot lip can be held which provides excellent grip apart from sufficient space inside for the cable looping.Using an EMCA heat shrink boot adapter is one way of providing environmental protection and strain relief to cable termination.

Applications:

  • The perfect solution for high volume applications which require both environmental protection and cable strain-relief

Advantage:

  • Low Cost
  • Sealing and strain relief of backshell by heat shrink boot
  • No special tooling required

Image result for emca gmbh logo

EMCA Heat Shrink Boot Backshell to Suit MIL-DTL-38999 Series III

  • A39-934- _ _ Straight

EMCA Heat Shrink Backshell to Suit VG96912

  • A59-933- _ _ Straight
  • A59-792- _ _ Straight

EMCA Heat Shrink Boot Backshell to Suit MIL-DTL-38999 Series I & II

  • A45-410- _ _ Straight

EMCA Heat Shrink Backshell to suit MIL-DTL-26482 Series II; MIL-DTL-83723 Series III, MIL-DTL-5015 Crimp

  • A89-095– _ _ Straight

EMCA Heat Shrink Backshell to suit MIL-DTL-5015 Solder, VG95234

  • A29-979- _ _ Straight